back to Woosh home page


CST kit: £499 including postage

We also have 26 front and rear BPM kits, same price

Shipping cost to other EU countries: £15.





Labour: approximately 3 hours, professional fitting: about £100

Key points:

  • - 26" rear motor wheel
  • - 36V 15AH square bottle battery
  • - Throttle and PAS

Please download and read the user manual before purchasing
https://wooshbikes.co.uk/manuals/CSTKitManual.pdf
Read also the LCD manual (recommended).

Important points to check:

  • - does your bike have 26" wheels?
  • - have you measured the rear drop out? it must be between 135mm and 145mm, the CST kit has 145mm axle length.
    The rear BPM kit has 135mm axle length.
  • - do you have disc brakes?
    The caliper may foul against the motor shell.
  • - is there enough room to mount the square bottle battery?
  • - is there enough room to mount the pedal assist sensor (PAS)?
  • - will the supplied brake levers work with your bike?
  • - where are you going to fit the controller box?
  • If you have hydraulic brakes, the supplied brake levers are cable operated, so they won't work.
We recommend that you send us pictures of your bike to kits at woosbikes.co.uk - we'll check for you.

What if I only use thumb throttle?

The good points are:
- Less work.
- Bike is much more responsive, does not need brake sensors.
- Suits cyclists who only need temporary help to rest their legs.
Bad points:
- The throttle is sensitive and instantaneous.
Please note: we insist that you must fit brake sensors for your safety.



This kit is sold with special conditions:
- You agree to get the kit installed by a competent bike mechanic with good knowledge and experience of e-bikes.
- You agree to use the product within the manufacturers specifications (15mph).
- You accept full responsibility for possible dammages to your bike, battery and consequential losses due to the use of the kit.

Limited guarantee:
- The product is guaranteed for 1 year return to base, repair or replace at our discretion.

Approved fitters:
If you don't know any fitter, please contact us to help you locate one near you.
Central England: Cyclezee Ltd Tel 07962 407799
North England: muckymitts, Durham
Scotland: bigroy, Lochgelly (Kilcardy)
Specifications
For full specifications, please read the user manual
MotorCST: MXUS XF08C
BPM: 8FUN BPM
Nominal powerCST: 250W
BPM: 350W
VoltageDC 36 Volts
Limit current (max. continuous)CST: 15 Amps
BPM: 20 Amps
Motor WeightCST: 3.3kgs
BPM: 4.5kgs
Rim26" double-wall with 13G stainless spokes

What is in the kit?
- 36V 15AH battery kit
- 26" motor wheel
- Controller and box
- inline brake sensors.
- thumb throttle.
- LCD display.
- Speed sensor.
- Wiring loom.
- spoke key.


Easy controls
Before riding, press the on/off next
to the trip computer on the left handlebar.
There are 5 level of assistance, 1 provides the least
assistance, 5 the highest.
Press the + and - button to select the desired level.
If you start pedalling, the pedal assist sensor will sense
that and supply about 80% of the energy.
The bike will woosh you along nicely - the motor is very quiet.
Maximum speed is 15mph and computer controlled.


Installation

1) Install the Pedal Assist Sensor
2) Install brake handles.
3) Install the thumb throttle.
4) Install the LCD.
5) Install the battery.
6) Install the controller and connect the waterproof cable loom and the battery cable.
7) Install the motor wheel.


Kit content:

Picture gallery of the CST kit

Click on any picture to start slideshow.

Coming soon

Seat tube controller

Available as an option.
Can be purchased separately
Price: £25
Woosh seat tube controller