Disabling the pedal assist on the Mono

Go back to support page
In the case where the user isnít confident riding the bike with pedal assist enabled, there is a way to disable it and only use the throttle to engage/regulate the speed of the motor. Please see below for the instructions on how to do this.
mono-battery
Unlock and then remove the battery from the bike.
mono-battery
Remove the four screws in the base of the battery receptacle and then lift out the receptacle.
Mono control housing
Open the black housing beneath to expose the controller and wiring by removing the side of the casing.
Mono PAS cable
Unplug the connectors as shown. Refit the parts in reverse order. The motor on your bike is now solely controlled using the throttle and will no longer provide assistance when the bike is only being pedalled.